Biostrata Residency Week Two: Undersea Adventure

This past week at Biostrata: Cutaway Ecologies, Mr. Shark got his coat of many colours. One of the many wonderful things about working at the Charlotte Street Arts Centre is that they have day camps, so this week little dancers came out to visit and learn on their lunch breaks.

I started off by finishing up my form with cotton:
Biostrata Week Two - shark skin, octopus stone_3

The pieces are all ripped instead of cut so they have a frayed edge. That is one of my favourite attributes of this method, it gives it topology. This is really important when it comes time to paint. Blank canvas has never been my thing, better to have landmarks to work within.

spider, squirrel, shark_wm

When I dug out my paints (I’ve really missed painting with gouache) I discovered this dried up old tub had turned into these beautiful cell patterns. I think I will use it to model the painting on the inside.

Biostrata Week Two - shark skin, octopus stone_1

So the patterns were loosely drawn, and colours chosen. Mixing and matching colour chips (like you get for house paint) is a great way to figure it out. That way you know what you’re looking for before you start trying to mix, and you can check the combinations ahead of time.

Shark Painting WM

Funny thing I noticed, when I am paint mixing, and arrive at the colour I’m looking for, it takes on a sort of velvety look like melted chocolate. That’s how I know when to stop. I’m sure it’s just an illusion my brain uses to let me know. Same thing happens when I get the right amount of water in there.

This week there was plentiful rainwater to work with, which made it extra lovely. Working in a rain storm even made me feel a little like a shark.

Biostrata Week Two - shark skin, octopus stone

The octopus carving was also refined. Here it is wet by the rain to show you the colour it will be when polished. I learned from a visitor that he looks like an infant from this angle. I can certainly see that now, and it adds a different dimension to these nested sculptures.

Biostrata Week Two - shark skin, octopus stone_2
So I have a little left to do on this piece this coming week, which is okay because he will be the largest one.

Also exciting on Monday, I had my first live radio interview. It gives a good overview of the project and it’s motivations, I will leave you guys a link when it’s up as a podcast. Thank you to Mark Kilfoil @ CHSR 97.9!

Shark painting_1 copy

Looking forward to finishing the first sculpture up this week, and starting the silk painting workshops. Last chance to sign up, it’s going to be a really fun month of Thursdays!

The idea of a waterlily.

My time at the New Brunswick College of Craft and Design is winding down. I’ve spent the last four years there: working, playing, becoming. It took me in, an emotional wreck, and spit me out a productive, contributing member of the community. Not to mention happy.

As a sort of homage, my first piece in our Graduate Studies show explores the idea of creativity. How we build it inside of us, like a little embryo. Not alone though, with lots of help from people who have practice.

A Green [Artist] Lily Pattern Design 3D Print

This piece began life as a 3D model, then was printed in plastic. To make a pattern for the full-size textile version, I covered one of the petals with masking tape to steal the form, then blew up the resulting shape.

A Green [Artist] Lily Flower Petals Pattern Sewing

The petals were all sewn up in digitally printed cotton (see Nymph for details)

A Green [Artist] Waterlily Centerpiece Cutaway Sculpture Petals

They were then attached together. When it came time to make the center, I photographed the 3D model and blew it up to the correct proportions…

A Green [Artist] Lily Petals Stamen Design

…and made a flat pattern by tracing it, adding a couple inches for shrinkage, and coating the whole thing in packing tape (my favourite).A Green [Artist] Lily Stamen Felt Flat Pattern

This protects it from the water when wet felting, so it doesn’t all fall apart before you get it sorted.

A Green [Artist] Lily Flower Felt Stamen Rain

Wet felting outside on a rainy day seemed appropriate. You end up soaked anyway. Wool was added to both sides of the flat pattern so that it acts as a resist. When finished you get this:

A Green [Artist] Stamen Felt Vessel

When the felting was finished, the resulting vessel was dyed with acid wash dyes. While it was drying I blew up a balloon in there to produce the rounded shape.

The flower itself is inspired by the water lily. Our college sits right along the river, and our culture is greatly influenced by that connection.

A Green [Artist] Waterlily Flower Idea Cutaway Centerpiece Sculpture

Inside is a tiny green Marimo moss ball in his aquatic terrarium. You may remember these guys from Nesting.

Around him are the protective and encouraging petals of my teachers and fellow students. He is the little embryo, the idea inside the lightbulb. For him this piece is named, Idea.

If you would like to meet him in person stop by the Graduate Studies show, Super Bees. It’s opening 5-7pm on Friday the 13th in The Gallery at NBCCD. Look forward to seeing you there!

What a mouse has to do with visualizing space.

I find it hard to visualize three-dimensional space. When designing quilts, and other 2D creations, I rely heavily on digital software to help me see what is coming next. This allows me to easily test out composition and colour scheme before I start working in cloth. Without a similar aid, I felt at a bit of a deficit when I began working in sculpture.

Over the past term I’ve been dealing with this issue. I’ve just finished a course in 3D printing, which has taught me how to use digital modelling software, mainly Lightwave. I was amazed how easily you can place a sketch into the program as a backdrop and build out from it. I first tested this theory with a spaceship design my partner had drawn. I love collaboration.

Warren Steeves Spaceship 3D Model - A Green Artist

It really seems to be a matter of getting into the zone and thinking about the screen as an open environment where you are actually manipulating 3D objects. Then you don’t have to worry about remembering sets of rules.

Warren Steeves Spaceship 3D Model Action - A Green Artist

I started applying this to sculptures I was planning almost right away. The following three will be created in cloth and plant over the next month.

Tree Sculpture -  A Green Artist Tree Shelving Sculpture 3D Model Full -  A Green Artist

I’ve found it really helpful to be able to tweak composition ahead of time, and see it from all angles. I am interested to see what impact this has on the finished creations.

Fungal Islands A Green Artist Fungal Islands 3D Model Bright - A Green Artist

We learned a little animation too, and though I don’t find it as applicable to my work, I can see definite possibilities for working out kinetic sculpture, internal and external lighting, and design proposals.

The funnest part is that I got to 3D print one of my objects! I can’t really describe what it is like to build something in the computer, and then have it in your hand. The difference between working digitally or in reality seems almost negligible.

Lily Centerpiece A Green Artist Waterlily Centerpiece Cutaway - A Green ArtistWaterlily Centerpiece Cutaway 3D Print Sculpture - A Green Artist